Whetu Haanraads. Lighting. July 16th , 2017.
2. The LED color temperature used is not good, the simple understanding can be considered the color of light. Color temperature is low, then the light will be out of the green partial red, too high will be blue, are not suitable for indoor lighting. So the indoor lighting on the LED lamp color temperature is a very important parameter. LED generally defined color temperature in the 2700K-4000K for the warm, 4000K-5000K for the natural white, 5000K-6700K for the white, warm white and natural white temperature will give a warm, warm feeling, suitable for use in hotels, hotels, and bedroom. While the white is to give people cool cool feeling, for the office, living room lighting more (fluorescent light is generally more of this color temperature).
One thing to remember here, and something that you cannot over or under do, is the recessed lighting spacing. The placement of these lights can either enhance the ambiance, or make the decor look completely disoriented. Keep reading the following section of the article which tells you about the best ways to arrange the recessed lights.
1. High brightness (blue and green) white LED is very sensitive to static electricity, is determined by the characteristics of the LED itself. Exceeding the maximum forward DC current and maximum reverse voltage that it can allow, it may cause damage or breakdown of the LED. Such as three-lamp LED module, each lamp will have an anti-static resistance, coupled with the resistance for the current limit, a total of four. Anti-static resistance can effectively inhibit the electrostatic damage to the LED.">LED will certainly become the fourth generation of lighting, its development momentum more and more fierce, the main advantages are: energy saving, long life, no flicker does not hurt the eyes, do not attract mosquitoes. High-power LED lighting as long as the thermal design is good enough, 3-5 million hours of life is no problem (life is defined as: LED because it is a semiconductor component, the chip affected by the temperature will produce light failure, when the LED luminous flux because Light attenuation of less than 30% of the initial luminous flux, the basic LED lighting is no lighting significance, that is, life summary, although this time the LED lights can still light it, but the brightness has dropped significantly, so LED lighting is very Important is important).
Table lamps are best used for ambient lighting. To create a soft, diffused glow, use table lamps with opaque shades that reflect light above and below.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Jinda by Net claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.