Corina Marisol Lighting, 2017-10-11 15:21:08. From the force in the same time to do the power of the number of the introduction of the concept of electric power, the current work fast, electric power is large; current work slow, electric power is small, or in the same time, the more power to do more power, On the LED, not the greater the power, the higher the brightness of the product. To the United States and the United States electronic light red LED, for example, axial brightness of 1200mcd, the current is 40ma, power 0.48W; three lights white LED at the same brightness, the current is 18ma, power is only 0.24W; The power of the two kinds of light at the same brightness is different. So when we buy LED to pay attention to its axial brightness, rather than power.
Blaguna Rajani Lighting, 2017-03-14 16:31:42. Consider the height of the light. When placed above a table or counter, it should be at least 30" above the surface. Else, it should end at 7' from the floor. When placing for decorative purposes, as long as it does not impede movement, the height of the light can be anything you wish it to be.
Kadri Janan Lighting, 2017-03-14 02:39:04. Although, both CFLs and LEDs use considerably less electricity than the traditional bulbs. However, long-lasting and more efficient light bulbs pay off over time. CFLs are comparatively cheaper than the LEDs, therefore, one can choose according to the set budget.
Christabel Daniella Lighting, 2017-03-13 17:42:59. Also, one can choose the lighting products which are energy star rated, as it exceeds the federal minimum standards for efficiency, to save money.
Ivona Gita Lighting, 2017-03-13 10:36:06. There are a lot of lighting fixtures on the market today and choosing from among the countless designs could be a daunting task. Knowing the different kinds of lighting fixtures and what is readily available will help us choose intelligently. A ceiling fixture is probably the most familiar and common lighting fixture and the following are some of the most readily available.
Clarissa Bancroft Lighting, 2017-03-12 01:23:48. In this technique, one wall of the room is completely illuminated with recessed lights. Most of the time, it typically highlights a piece of art or wall hanging on this wall, which is essentially the focal point of the entire room. Such an arrangement lends sophistication to the interiors with minimum efforts and lesser lights. To install recessed lights using this technique, you first need to determine the spacing area. Divide the entire length of the wall by the wattage setting which is guided for wall washing. For example, 100 watt is recommended for 2 feet, 150 watts is recommended for 4 feet, and 150 watts is recommended for 3 feet. Once you get this calculation right, install the lights at the same distance.
Jyotsna Nitika Lighting, 2017-03-13 02:38:37. You can go for a solar option if you want to, they come in variety of forms. There are lanterns, tiki torches, walkway and driveway lights and small floodlights. You can explore these options and you don't need to worry about installing electricity. As the technology has progressed to great extent, solar light functions in a better way than previous. Even on shady or cloudy conditions the lights can be charged.
Sela Anamarija Lighting, 2017-03-13 10:44:09. For an eclectic touch, go for a mix of materials such as glass and metal, brass and chrome, and use the fixture to add the eclecticism to the room.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Jinda by Net claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.