Lighting. Saturday , June 03rd , 2017 - 17:19:34 PM
Once the design and type of outdoor lighting fixture is selected, the next important question is voltage. Outdoor light fixtures are available in either 12-volt or 120-volt versions and for houses the best deal is low voltage outdoor lighting. These are easier to install as the system runs on harmless 12-volt current with light weight wiring laid on the ground or buried just below surface. The 120-volt system on other hand is same as used in interior of house and requires precautions and handling. The advantage of high voltage outdoor lighting is that it is permanent using buried conduit whereas the low voltage outdoor lighting is that is easily damaged due to superficial placement of wires.
7.Once all the lights are connected, unscrew the screws of the transformer. Using a wire stripper, strip off approximately '" of the cable wire for it to be attached to the transformer.
Techniques that space recessed lights to highlight an area, are totally different. Since these lights are not related to overall lighting of the room, you can subtly add the lights on the section of the room that you want to highlight. The spacing depends on a few different things, like the subject that you have selected to highlight and wattage of the light bulbs that you are using. When it comes to highlighting, make sure that the lights are placed at least 3 feet away from the wall. Most of the time, 50 watts and 75 watt bulbs are placed 2 feet away from the wall. But, smaller bulbs like 25 watts are placed 3 feet away from the wall.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Jinda by Net claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.