Amor Pistis. Lighting. August 28th , 2017.
1. High brightness (blue and green) white LED is very sensitive to static electricity, is determined by the characteristics of the LED itself. Exceeding the maximum forward DC current and maximum reverse voltage that it can allow, it may cause damage or breakdown of the LED. Such as three-lamp LED module, each lamp will have an anti-static resistance, coupled with the resistance for the current limit, a total of four. Anti-static resistance can effectively inhibit the electrostatic damage to the LED.
One thing to remember here, and something that you cannot over or under do, is the recessed lighting spacing. The placement of these lights can either enhance the ambiance, or make the decor look completely disoriented. Keep reading the following section of the article which tells you about the best ways to arrange the recessed lights.
Electric wall sconces have additional costs of installing them unless of course you are qualified to perform the installation. Once the hole is cut, the wires run, the sconce is connected there is still expense involved. The wall will require touch-up painting which often leads to the whole room. Rearranging a room may have the sconce in an awkward location or you may be limited how you arrange your room.
Weathered shutters add a touch of shabby chic flair to this comfy gray and white bedroom out of Dcor Gold Designs. It's easy to work a vintage vibe into even a small bedroom use an antique chest for a nightstand or footboard, place an old door instead of a headboard, or decorate your walls with framed vintage embroidered handkerchiefs, botanical or maps designs.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Jinda by Net claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.